Improved 4-nitrophenol removal at Ti/RuO2–Sb2O4–TiO2 laser-made anodes

Environmental Science and Pollution Research - In this study, binary and ternary mixed metal oxide anodes of Ti/RuO2–Sb2O4 and Ti/RuO2–Sb2O4–TiO2 were prepared using two different...     

Natural heavy metal and metalloid concentrations in sediments of the Minho River estuary (Portugal): baseline values for environmental studies

Forty-nine surface sediment samples from the Minho estuary sector between Tui and Caminha were analyzed for grain-size contents, Al, As, Cr, Cu, Hg, Li, Pb, Sn, and Zn concentrations. Selected heavy metal (Cu, Cr, Hg, and Zn) and metalloid (As and Sn) distributions were normalized against Al and Li with the main goal of compensating for natural grain-size variability and to separate natural from anthropogenic contributions, by using a combination of normalization techniques (definition of regional geochemical baselines (RGB) and determination of enrichment factors (EF)). Lead did not reveal a significant relationship with Al and Li. Aluminum explained more variance than Li for As, Cu, Hg, and Zn. Assuming the general non-impacted metal character of the Minho River estuary sediments, RGBs are defined for differentiating between natural and anthropogenic contributions. Based on RGB defined for each heavy metal/metalloid, the degree of enrichment is estimated through the determination of EF. Despite the relatively low total heavy metal and metalloid concentrations, the defined RGB identifies a set of samples characterized by presenting As, Cu, Cr, Hg, and Zn enrichments relatively to expected natural levels. Mercury is the element showing the highest level of enrichment relative to the baseline values being spread through all the study area. Tin present enrichments relatively to Al and or Li always lower than 1.5 suggesting natural contributions.     

Environmental remediation processes by zero valence copper: reaction mechanisms

Environmental Science and Pollution Research - Recent studies have shown Cu(0) as a promising material for the removal of organic and inorganic pollutants. However, there is no review addressing...     

The implementation of environmental education to promote sustainability: an overview of the processes and challenges

ABSTRACT

This paper interprets aspects of the implementation of environmental education in a Higher Education Institution, situated in a developing country, to promote Education for Sustainable Development (ESD). The paper will allow educators to categorise the multiplicity of ESD programmes and projects in higher education institutions, determine their limitations and acceptability, and benefit from the theoretical framework of affective learning in designing new ESD interventions. The paper will also provide an overview of the processes required to establish ESD in developing and developed countries. This paper will further help universities to develop a better understanding of how integration of the three components of sustainable development – economic development, social development and environmental protection – can be incorporated in higher education. The paper explores the challenges for planning the implementation of ESD in an education faculty, outlining the potential lessons learned that could assist in improving ESD efforts in Faculties of Education.     

Control of molecular weight distribution of the biopolymer pullulan produced byAureobasidium pullulans

The influence of carbon, nitrogen, and phosphate source, along with concentration, was determined for effect on the weight average molecular weight, molecular weight distribution, and yield of pullulan produced byAureobasidium pullulans NRRL-Y 6220. Batch systems, scale-up batch, and continuous fermentations of 1 L and 10 L were also evaluated as were processing variables, including solvents, and extraction conditions. Products with weight average molecular weight from 1.0 × 10⁵ to 4.0 × 10⁶ were produced in 100-g quantities by varying fermentation conditions such as constituents of the culture medium, pH, and length of incubation. Three sets of culture conditions were defined for the formation of low (<5.0×10⁵), medium (1.0–2.0×10⁶), and high (>2.0×10⁶) weight average molecular weight polymer. These defined molecular weight fractions of pullulan were used in further studies in producing films and fibers.     

Yeasts as a model for assessing the toxicity of the fungicides Penconazol, Cymoxanil and Dichlofluanid

In the present work the sensitivity of yeast strains of Kluyveromyces marxianus, Pichia anomala, Candida utilis, Schizosaccharomyces pombe and Saccharomyces cerevisiae, to the fungicides cymoxanil, penconazol, and dichlofluanid, was evaluated. Dichlofluanid induced the most negative effects, whereas penconazol in general was not very toxic. Overall, our results show that the parameters IC50 for specific respiration rates of C. utilis and S. cerevisiae and C(D) for cell viability of S. cerevisiae can be applied to quantify the toxicity level of the above compounds in yeast. Hence, could be explored as an alternative or at least as a complementary test in toxicity studies and, therefore, its potential for inclusion in a tier testing toxicity test battery merits further research.     

Mill leaching: a viable substitute for mercury amalgamation in the artisanal gold mining sector?

Artisanal small-scale gold miners (ASM) occasionally employ whole ore amalgamation by adding mercury into ball mills to recover gold. In this process, 25–30% of the mercury added is lost to the environment. It is also inefficient less than 30% of gold is recovered. Amalgamation, followed by cyanidation, has been observed at many artisanal mining sites. This combination poses additional environmental and health consequences. Tests with ore samples from Talawaan, North Sulawesi, Indonesia indicate the possibility of replacing mercury by cyanidation in the ball mill, reaching gold extraction of 93% in 6 h of leaching. The gold in the Indonesian ore sample is fine and less than 8% of gold recovery was obtained with gravity concentration of the ore ground 80% below 0.25 mm, which is a reasonably fine grain size for artisanal gold operations. Replacing mercury addition with cyanidation in ball mills was implemented in one artisanal gold mining operation in Portovelo, Ecuador, achieving 95% of gold extraction in 8 h of mill leaching. This technique demonstrated a drastic improvement in gold recovery. It was found to be a simple, inexpensive technique well accepted by local miners. The results from laboratory and field tests are promising; however a thorough investigation into the socio-economic and environmental aspects of this presented alternative must be conducted prior to introduction.     

An ultrastructural study of Crassostrea angulata (Mollusca,Bivalvia) spermatogenesis

The cytoplasm of Crassostrea angulata (collected from the Atlantic coast of Northern Spain, Galiza, between 1992 and 1993) spermatogonia contains a few proacrosomal dense vesicles and intermitochondrial round granulo-fibrillar dense bodies. In primary spermatocytes, large cytoplasmic spaces appear occupied by large round and more scattered granulo-fibrillar dense bodies which are intermingled with cord-like dense structures and are in close association with mitochondria and the rough endoplasmic reticulum. As a result of Golgian activity, the number of dense proacrosomal vesicles increases and a flagellum arises from the centrioles. During the second meiotic division, several round dense bodies surrounding cord-like dense structures as well as dense proacrosomal vesicles, were observed between chromosomes. During spermiogenesis, no Golgian activity was noticed, and only the rough endoplasmic reticulum was observed in close association with proacrosomal vesicles. Similar results were observed for Ostrea edulis (collected from the Atlantic coast of southern Portugal, Algarve, between 1992 and 1993). Spermatozoa of both species are of the aquasperm type, and although their ultrastructure is quite similar, silver and phosphotungstic acid-chromic acid stainings enabled us to clearly distinguish both species at the ultrastructural level. The different morphological aspects of spermatogenesis in the Pteriomorphia and the use of silver and PTA stainings in the Mollusca are reviewed and discussed.     

Economical sensitivity analysis of rice husk utilization in a 300 kW<Subscript>el</Subscript> Micro Thermal Power Plant

Production of rice husks in Rio Grande do Sul State, which is the major rice production state in Brazil, needs to be adequately managed to diminish environmental impacts. A Micro Thermal Power Plant (MTP), which is a compact and small-scale biomass thermal power plant technology, can be used in electricity generation in thermal power plants with a power capacity up to 800 kW_el. This paper presents a feasibility analysis of a 300 kW_el MTP that is fuelled by rice husks using two different scenarios: the autoproduction (Case 1) and the independent production (Case 2) of electricity. Both scenarios were found to be unfeasible. Therefore, a sensitivity analysis is performed to evaluate the variables that affect feasibility, such as the electricity commercialization price, the value of certified emission reductions and the financial interest rates. According to sensitivity analysis, small-scale thermal power plants could have feasibility if they received incentives through government programmes, such as through the exemption of equipment taxes and/or the reduction or elimination of the financial interest rate.